PL ENG DE SWE RU  
/\ \/
One-sided structural EPS panels - EURO-therm SP-J
Special sandwich panels with polystyrene core EURO-therm SP-J with one sided steel sheet cladding can be applied on already existing solid walls and roofs as additional isolation or facade change. EURO-therm SP-J-S are panels with one sided wall profilation and EURO-therm SP-J-D panels are panels with one sided trapeze roof profilation.
choose ->

(click on image)
no image no image
panel type one sided wall one sided roof
marking EURO-therm SP-J-S EURO-therm SP-J-D
width 1175mm (effective, covering) 1000mm (effective, covering)
length up to 10m (other lengths possible) up to 12m (other lengths possible)
panel cladding (covers) galvanised and prepainted steel sheet galvanised and prepainted steel sheet
core, insulation expanded polystyrene (EPS) expanded polystyrene (EPS)
standard thickness 80 mm - 250 mm 80 mm - 250 mm
thickness (mm) 100 120 150 200 250 100 120 150 200 250
U [W/m2K] * 0,39 0,33 0,26 0,20 0,16 0,39 0,33 0,26 0,20 0,16
weight (kg/m2) * 7,53 7,93 8,53 9,53 9,92 7,76 8,16 8,76 9,76 9,97
more... more...
* Estimated or calculative data.

IDetailed informations

Standard dimensions, sizes of one-sided wall sandwich panels.
effective width (covering) 1175 mm*
modlular width (with locks) 1194 mm
standard minimum length 2,7 m
possible minimum length from 0,5 m
recommended maximum length up to 6 m
possible maximum length
(on special request)
up to 12 m
(limitations because of color and thickness.)
standard thickness (mm) 80, 100, 120, 150, 200, 250
possible thickness (mm) 40 - 300
Production of panels with different thickness and lengths on special orders is possible.
One-sided sandwich panels do not have the same strenght and durability than normal two-sided panels.
Because of that, there is no guarantee on such panels.
Standard dimensions of roof sandwich panels with one-sided cladding
effective width
(covering width)
1000 mm
modular width
(with overlapping trapeze and lock)
1100 mm
standard minimum length 2,7 m
possible minimum length from 0,5 m
recommended maximum length up to 8 m
possible maximum length
(on special order)
up to 10 m (restrictions because of thickness and color)
standard thickness (mm) 80, 100, 120, 150, 200, 250
possible thickness (mm) 40 - 300
Production of panels with different thickness and lengths on special orders is possible.
One-sided sandwich panels do not have equal strenght as standard two-side clad sandwich panels, because of their characteristics we do not provide guarantee for such panels.
Panel length and temperature expansion

We do not recommend the use of very long sandwich panels mainly on the walls, but in some cases also roofs due to sunlight (temperature expansion of metal), as well as the difficulties associated with the unloading and assembling long panels. Wall panels should be installed single-spanned. Using too long elements may result in deterioration of aesthetic or damage panels. We are not responsible for damages resulting from the use of too long sandwich panel pieces or incorrect assembly. We do not provide guarantee for panels ordered against our recommendations concerning colors and lengths.

Profilation of one-sided wall panels with EPS core - EURO-therm SP-J-S

Outside cladding profilation of one-sided wall sandwich panels
L

linear
(standard profilation)

no image

(click to enlarge)

no image

(click to enlarge)

no image

(click to enlarge)

R

grooving

no image

(click to enlarge)

no image

(click to enlarge)

no image

(click to enlarge)

G

flat, plain
(no profilation)

no image

(click to enlarge)

no image

(click to enlarge)

Top cladding profilation of one-sided roof panels
T35

trapeze corrugation T35
(standard profilation)

no image

(click to enlarge)

no image

(click to enlarge)

no image

(click to enlarge)

Possible core in one-sided panels

expanded polystyrene - EPS (standard)

no image
Production of panels with different insulation materials is possible. (graphited EPS, polyurethane with various density and others)
Standard galvanised and galvanised steel sheets - parameters
type of material galvanised, poliester painted steel sheets
steel sheet thickness 0,5 mm
galvanic layer thickness 225 g/m² - 275 g/m²
poliester coating layer 25 μm
decorative varhinsh 2V078
bottom varnish 1G410 - 7 μm
Possible steel thickness 0,45mm - 0,6mm
Protective film

Sandwich panel claddings (prepainted steel sheet covers and flashings) are covered with a layer of protective film. The protective film must be removed from the panels before 1 month after recieving the plates. For longer storage panels should be protected from sun exposure, extremal temperatures and other atmospheric conditions. A good practice is to place panel packs with a small decrease, causing rainwater run off.
Cutting of sandwich panels and flashings.

You should use proper tools for cutting sandwich panels, that do not overheat the steel surface. Excessive heat during metal cutting (eg. An angle grinder with discs) damages the galvanic coating of steel sheets and can be a cause of corrosion. Great heat can also excessively damage the core, insulation. To cut sandwich panels use circular saws for metal cutting, special sandwich panel - saws or other proper equipment. When cutting panels remove excess metal filings that can cause corrosion, and prevent sparks and filings from falling onto other panels.
Standard ABO colors

RAL 9010

RAL 9002

RAL 9006

RAL 3011

RAL 8017

RAL 7024

The colors depicted on the website are for guidance only and can be different from real color coatings on panels.
Availability, production possibilities and pricing of certain colors are determined individually.
Other color examples

RAL 1002

RAL 1015

RAL 1021

RAL 5010

RAL 6029

RAL 7035

RAL 9007

The colors depicted on the website are for guidance only and can be different from real color coatings on panels.
Availability, production possibilities and pricing of certain colors are determined individually.
Dark colors, panel lengths - warning

We do not recommend the use of dark colors (for example, according to RAL palette: 3011, 3005, 8017, 7024, 6005) due to sunlight absorption and overheating of steel sheets on panels. Temperature expansion of metal and possible damages caused by overheating and temperature changes may result in deterioration of aesthetic or damage of panels. We do not take responsibility for damages resulting from the use of very dark panels or too long elements. We do not provide guarantee for panels ordered against our recommendations concerning colors and lengths.
Color Repeatability

We do not guarantee exactly the same color tone of the painted surfaces for orders placed in different terms. This concerns especially metallic colors (for example RAL 9006 or RAL 9007).
Special panels with "SP" marking - important information

Special, non-standard EURO-therm SP sandwich panels, including one-sided panels, perforated - acoustic panels, panels with PVC, fiberglass laminate cladding, panels with stainless steel covers, and other productis referred to as non-standard or special, produced according to special orders specified by the customer have different parameters and characteristics depending on each order and project. These panels are not standard line products, and because of that, they do not have any certificates or declarations and there are limitations of guarantee for such panels. In order to obtain informations on the type of plates, please contact us.
The informations and materials given above

(on this website)

are for informational purposes only. Informations contained therein are not legally binding and do not constitute an offer within the meaning of Article 66 § 1 of the polish civil code do not constitute assurance, in particular within the meaning of art. 556 of the polish civil code. Description and confirmation of availability of goods takes place only during sale according to specifications provided by the Sandwich Panel Factory ABO (Fabryka Płyt Warstwowych ABO Boguslaw Bugała) in the form of a contract, purchase order or order confirmation.
back print
address:
Fabryka Płyt Warstwowych ABO Bogusław Bugała
factory: Mchowo 100, 06-300 Przasnysz
invoicing: Mchowo 1, 06-300 Przasnysz
województwo mazowieckie, POLAND
GPS: N 53°04'15.09" | E 20°51'02.88"
contact:
tel: (+48) 29-751-34-01
fax: (+48) 29-751-34-03
e-mail:
Bank: Bank Pekao S.A. / Bank account No.:
EURO: (IBAN): PL59 1240 1617 1978 0010 3691 5883
PLN: (IBAN): PL39 1240 1617 1111 0010 3691 5652
SWIFT: PKOPPLPW

Last update:  13.10.2017 - Copyright © 2016 Fabryka Płyt Warstwowych ABO
webmaster 

Powered by PHP Poprawny HTML 4.01 Transitional Poprawny CSS